Origin	China
Model Number	GVP318
Brand Name	Global Active

.Size and angle of the stencil holder are precisely controlled by
software to allow operator to set the position of the X Y and 0 easily.
PCB is secured by vacuum and supported by pins for positioning
accuracy;
.Two cameras,one on the top and one on the bottom,
simultaneously capture the images of the stencil and the PCB
fiducial mark,Combined with self developed high speed mark point
recognition and positioning technologies to achieve high printing
precision;
· Automatically reset after changing a different stencil and PCB to
minimize setup time;
· Automatically adjusts the conveyor width for different PCB,reduce
PCB changing time to a minimum

Dimensions Length 1,260mm Width 1,174mm Height 1.597mm
Weight 828kg
PCB PCB Length Width Max: 400x 500mm Min: 50mm X 50mm  
PCB Thickness 0.5-3.0mm
PCB Clamping Vacuum
Mark point  Min: 1mm X 1mm Max: 4mm X 4mm  
Operating System Software Windows XP
Display 15”monitor LCD
Input Device Trackball
PCB Conveyor Conveyor Width Adjustment System to automatically
adjust
PCB Convey Direction Lç«ÂŠ�/span>>R or Rç«ÂŠ�/span>>L(programmable)
Conveyor Fixation Front rail fix (optionally rear rail fix)
Printing Mode Single print or Double print(programmable)
Printing Speed 10-200mm/sec(programmable)
PCB Pressure 10-20kg(programmable)
PCB and Stencil Separate Speed PCB 0.1ç«ÂŠ�/span>4mm/sea
(programmable)
Vision System No. of  Camera 2 camera(observe two mark points
simultaneously)
Mark Point Recognition Gray scale and pattern
Cleaning Wet,dry,vacuum(user preference)
Printing Precision ±0.015mm
Power 220AC±10% 50Hz
Power Consumption MAX.1.2KVA
Air Force MIN.0.5MPa